









AlpWalk S1 - Hip Assistive Exoskeletons
PREORDER (Limited to the first 100 customers. Ships on October 31.)
Important Notice: This product is a non-medical walking assistive device. It is not intended to diagnose, treat, or prevent any disease. It is not a substitute for professional medical devices or the advice of a physician.

Take on hills and stairs with up to 800 W of peak assistance and 35% less effort.

Go farther with up to 30 km of range, powered by a quick-swappable 4,600 mAh battery.

Move naturally with 99% gait recognition and AI that adapts assistance to every step.

Go anywhere with an ultra-light 2.4 kg design that packs easily into a 20L backpack.

Move with confidence through precise 0.1° joint control and multi-layer safety protection.

Engineered from the core with a fully self-developed SoC + MCU architecture and end-to-end algorithm.
Award Winning Product
-
14-Day Return
-
24 Months Warranty Protection
-
Quick Expert Help
Less Walking Energy Cost
AI Adaptive Support
Lasts up to 4-6 Hours
Lightweight & Packable
Gentle-Pace Algorithm Optimization
Smart Health Care App
All-Weather Durability
Rigorous 10,000+ Hour Test
Technical Specifications
- Product model
- AlpWalk S1
- Metabolic Decrease Rate
- 35%
- Gait Recognition Accuracy
- 99%
- Maximum Speed
- 15 km/h
- Rated Power
- 800 W
- Motor Type
- Permanent Magnet Synchronous Motor
- Motor Peak Torque
- 18 N·m
- Reduction Ratio
- 9
- Rated Voltage
- 14.8 V
- Peak Current
- 30 A
- Motor Protection Rating
- IP54
- Battery Type
- Ternary Lithium-Ion Battery
- Battery Rated Energy
- 66.24 Wh
- Battery Rated Voltage
- 14.4 V
- Battery Rated Capacity
- 4600 mAh
- Battery Life
- 4-6 h
- Battery Range
- 30 km
- Charging Time
- 80 mins
- Cycle Life
- 400 cycles
- BMS Protection Features
- Overvoltage, Overcurrent, Undervoltage
- Charging Solution
- 65W Type-C Fast Charger
- Suitable Height
- 155-190 cm
- Suitable Weight
- 45-100 kg
- Suitable Waist Range
- 60-110 cm
- Storage Dimensions
- 440270160 mm
- Net Weight
- 2.4 kg
- Gross Weight (incl. battery)
- 2.81 kg
- Wear Time
- 20 s
- Support Components Materials
- High-Carbon-Fiber Composite Engineering Plastics
- Shell Fabric
- Breathable Nylon
- Operating Temperature Range
- -20℃~50℃
- Sensor Configuration
- Magnetic Encoder + IMU
- Encoder Resolution
- 14bit
- Control Frequency
- 100 Hz
- OTA
- √
- Communication Methods
- Bluetooth: BLE 5.0
- Full Device
- CE、FCC、UN38.3、MSDS、SRRC
- Battery
- CCC、CE、RoHS
* The battery life results were measured under laboratory conditions (25℃) with smart mode enabling 30% assistance at a speed of 4 km/h.
What In The Box
AlpWalk S1 x1
Shoulder Strap x1
Charger x1
Battery x1
Product Manual x1
Storage Box x1
FAQs
1. What is AlpWalk S1 designed for?
AlpWalk S1 is designed primarily for active seniors, covering everyday mobility support, rehabilitation assistance, and light outdoor activity. On the B2B side, AlpWalk is also exploring a range of industrial exoskeletons, including passive upper‑limb, lifting, and agile designs, for use in firefighting, inspection & rescue, industrial, and logistics scenarios.
2. Is AlpWalk S1 safe to wear for extended periods?
Yes. Safety is engineered across three dimensions: 0.1°‑level precision joint‑angle control, a high‑carbon‑fiber composite support frame, and multi‑layer mechanical safety stops that keep the joints within a safe range of motion. An optional U‑shaped fall‑protection airbag is also available for additional protection.
3. How long does the battery last?
AlpWalk S1 is equipped with a 4,600mAh battery. Under a 30% assist level at a 4 km/h walking pace, a single charge delivers up to 6 hours of battery life, with a range of up to 20 km, supporting everyday errands, park walks, and light outdoor activity.
4. Can the battery be replaced or swapped? How fast does it charge?
Yes — the battery is swappable and charges via Type‑C at up to 65W, sharing a cable with most phones, with a full charge in about an hour. Carrying a spare battery on longer outings further extends the available range.
5. Why does AlpWalk S1 only offer 3 assist modes?
AlpWalk S1's three assist modes are purpose‑designed around how our senior users actually move through their day, with a "zero learning curve" as the core design goal — one tap to switch, no complex setup required. For our target users, a smaller number of clear, well‑tuned modes matters more than sheer mode count, which can add complexity rather than value.
6. What certifications does AlpWalk S1 have?
AlpWalk S1 has been certified under CE (Europe), FCC (US), and UN38.3 (battery), with an IP54 rating for dust and water resistance. It operates reliably across a ‑20℃ to 50℃ temperature range, and has passed 10,000 hours of rigorous full‑unit testing covering everyday walking, uphill/downhill, and stair‑climbing use.
What Our Users Say
14-Day Return
Return anytime
Free Shipping
To selected regions
12-Month Coverage
We've got you
Quick Expert Help
Fast Support





